There is KB article about, but... v1 ignore - this is not relevant for anything. Values mentioned are cloneid, backup size, pre-dedupe size and post-dedupe size. Normally you can get those with -r attrs or -S parameter when checking individual ssid record.
I can't say much about your second block as I do not know how the query was made. It is part of answer to the query and one needs to know exact query to be able to interpret results. Only you know that as you never posted query part used to get information.
ble1
4 Operator
•
14.4K Posts
2
October 14th, 2015 00:00
There is KB article about, but... v1 ignore - this is not relevant for anything. Values mentioned are cloneid, backup size, pre-dedupe size and post-dedupe size. Normally you can get those with -r attrs or -S parameter when checking individual ssid record.
babochabo1
2 Posts
0
October 14th, 2015 03:00
Thank you for your quick answer Hrvoje Crevlin ! Can you remember where you found this article in the KB?
That was nearly the verification of what I thought.
But what interests me too is : Why do I have second block of all these numbers ? (the second "v1:")
Do you know anything about that too ?
ble1
4 Operator
•
14.4K Posts
0
October 14th, 2015 08:00
As hinted before, if you search for mminfo and attrs you will find article https://support.emc.com/kb/192743
I can't say much about your second block as I do not know how the query was made. It is part of answer to the query and one needs to know exact query to be able to interpret results. Only you know that as you never posted query part used to get information.