This post is more than 5 years old
1 Rookie
•
100 Posts
0
1642
September 20th, 2012 05:00
Networker 7.6 SP4 Inquiry command don't show any SCSI divaces
Hello,
We have a problem with Networker 7.6 SP4.
We building new backup infrastructure, and we adding 2 storage nodes to the backup server(Suse).
Storage node A work fine- can backup, but storage node B not.
Sorage node B is:
OS: Windows 2003 x64 bit SP2
HBA: 2x8GB Emulex
Hardware: Dell
Sorage node B see Library Divace manager- see 2 tape LTO5 and robotic divace- everything is ok, but when running "inquiry" on Storage node can't see any SCSI divaces.
I've updated all firmware on HBA, drivers- everythink is ok on Divace manager.
I can't change settings on HBA(HBA Anywhere), because this node B have active connect to Clariion and Oracle work 24x7.
angel_isakov
1 Rookie
•
100 Posts
0
September 20th, 2012 23:00
Yes, it's inquire, but i was on customer site and wrote it wrong.
I've resolved the problem-it was microsoft problem, not a networker...
nmc2
268 Posts
1
September 20th, 2012 19:00
Command to query scsi devices is 'inquire' not "inquiry".
If you are running inquire command, run it with these switches "inquire -cl".
Also run 'dvdetect -s ' on storage node. This will detect library and updates the networker server with details about the library. You should be able to see the unconfigured library under storage node now.
Regards,
Prajith