Unsolved
This post is more than 5 years old
12 Posts
0
18485
August 29th, 2006 00:00
6024F Management
Hello,
We have a 6024F configured with 5 vlans as follows:
VLAN 5 192.168.5.1 /24
VLAN 6 192.168.6.1 /24
VLAN 7 192.168.7.1 /24
VLAN 8 192.168.8.1 /24
VLAN 9 192.168.9.1 /24
We are able to login to the management GUI using any of the vlan .1 addresses, but after that it logs us back out at random points. Should we be accessing the management GUI on a different/OOB IP address? It's running SW version 2.0.0.1 which appears to be the latest. Any help would be greatly appreciated.
Thanks,
Scott
We have a 6024F configured with 5 vlans as follows:
VLAN 5 192.168.5.1 /24
VLAN 6 192.168.6.1 /24
VLAN 7 192.168.7.1 /24
VLAN 8 192.168.8.1 /24
VLAN 9 192.168.9.1 /24
We are able to login to the management GUI using any of the vlan .1 addresses, but after that it logs us back out at random points. Should we be accessing the management GUI on a different/OOB IP address? It's running SW version 2.0.0.1 which appears to be the latest. Any help would be greatly appreciated.
Thanks,
Scott
No Events found!
sdaniels
12 Posts
0
August 31st, 2006 20:00
DELL-Cuong N.
1K Posts
0
August 31st, 2006 20:00
I'm sorry but I'm not part of the support team (I'm part of development engineering) so I have very limited access to the external support database and I cannot find this ticket in the system I have access to unfortunately. I don't know the issue you are observing but as I say, the same config you gave me does not cause a problem on my setup.
Cuong.
sdaniels
12 Posts
0
September 4th, 2006 15:00
We use that connection to tie the legacy network into the new VLAN network based on two 3448s and the 6024F. Like I said before, the two trunked 3448s can be managed via the GUI just fine.
I have some screen shots, but can't figure out how to post them. How do I post files/images?