This post is more than 5 years old
2 Posts
0
9852
August 3rd, 2011 13:00
Cannot Discover PowerConnect 6248's in Openanage Network Administrator
I just downloaded the OpenManage Network Administrator. I have five 6248's that I am having trouble discovering.
I've tried both HTTP and Telnet authentication methods. Both fail, which is odd, since a web browser and a telnet session (outside of OM Net Admin) will work.
Latest firmware on the powerconnects. Factory defaults, except setting the admin password and IP address.
No Events found!
DELL-Victor
98 Posts
1
August 4th, 2011 11:00
If you only have factory defaults set, you will need to setup an SNMP community string with su (super user) access as well. This string has to be set (and match) on the devices and in OMNM. If you already have SNMP configured and still don't see the devices, make sure you press the Go button on the Devices screen after discovery, since this screen does not refresh automatically.
Using OMNM (OpenManage Network Manager) 4.4, you should be able to discover up to ten devices, including 6248 switches as long as you don't already have 10 other devices discovered. You may also purchase a license for discovering devices beyond 10 if needed.
Hope this helps
V
hans555
18 Posts
1
August 4th, 2011 11:00
Do you have SNMP server community with ReadOnly and another SNMP server community with ReadWrite enable on each of the switch?
DELL-Victor
98 Posts
0
August 4th, 2011 16:00
.
Hmoll
2 Posts
0
August 8th, 2011 07:00
Thanks for the replies. I never set any of the SNMP settings, as I thought if I were setting the HTTP or Telnet that I didn't need to. I'm *very* unfamiliar with SNMP, so I didn't even try.
Every thing is working now. Thanks!
biggirl2012
1 Message
0
August 10th, 2011 20:00
Thanks for the replies,happy everyone
phan mem seo
, phan mem seo , phan mem seo , phan mem seo , phan mem dang tin