Unsolved
This post is more than 5 years old
2 Posts
1
36478
October 22nd, 2013 22:00
Configuration: Port-security on Cisco 2960
Hello,
Want the secure server that are connected to the port of Cisco Catalyst 2960.
The following configuration, any mistake?
Global :
ip dhcp snooping
ip dhcp snooping vlan X
ip arp inspection vlan X
ip source binding AAAA:BBBB:CCCC vlan X X.X.X.X interface fa0/1
On fa0/1 port :
switchport access vlan 85
switchport mode access
switchport port-security
switchport-security maximum 1
switchport port-security violation protect
switchport block multicast
switchport block unicast
ip verify source
spanning-tree bpduguard enable
ip dhcp snooping
ip dhcp snooping vlan X
ip arp inspection vlan X
ip source binding AAAA:BBBB:CCCC vlan X X.X.X.X interface fa0/1
On fa0/1 port :
switchport access vlan 85
switchport mode access
switchport port-security
switchport-security maximum 1
switchport port-security violation protect
switchport block multicast
switchport block unicast
ip verify source
spanning-tree bpduguard enable
That advise me on setting up storm-control broadcast/multicast/unicast (storm-control action shutdown) ?
Thank you very much!
No Events found!
Jasmine01
1 Message
0
June 2nd, 2014 21:00
Hi, emmaswitch. Have problem with Cisco Catalyst 2960 ? Maybe you can ask Cisco CCIE for help.