The iDRAC cable requires a 1 GbE BASE-T connection. In the DM5500 configuration with optical SFP28/SFP+ports in PCIe slots 3 and 4, a separate 1 GbE BASE-T switch is required for the iDRAC connection in addition to the two optical switches.
In the DM5500 configuration with copper 10GBASE-T ports, the iDRAC cable could be connected to either of the two copper switches, or to a third 1 GbE BASE-T management switch.
DELL-Charles R
Social Media and Communities Professional Dell Technologies | Enterprise Support Services #IWork4Dell
Did I answer your query? Please click on ‘Accept as Solution’. ‘Thumbs up’ the posts you like!
DELL-Charles R
Moderator
•
4730 Posts
•
25476 Points
87
1
Posted June 6th, 2023 10:00
Hello HT2307,
I think this has the information you are looking for.
Network cabling requirements page 35-36
https://dell.to/3OY59IT
The iDRAC cable requires a 1 GbE BASE-T connection. In the DM5500 configuration with optical SFP28/SFP+ ports in PCIe slots 3 and 4, a separate 1 GbE BASE-T switch is required for the iDRAC connection in addition to the two optical switches.
In the DM5500 configuration with copper 10GBASE-T ports, the iDRAC cable could be connected to either of the two copper switches, or to a third 1 GbE BASE-T management switch.
DELL-Charles R
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Accept as Solution’. ‘Thumbs up’ the posts you like!