Unsolved
This post is more than 5 years old
3 Posts
0
17932
July 30th, 2013 18:00
E1200 power commands?
Is there a command I can run on a E1200 to check for failed PSU's and or view input power in watts?
Unsolved
This post is more than 5 years old
3 Posts
0
17932
July 30th, 2013 18:00
Is there a command I can run on a E1200 to check for failed PSU's and or view input power in watts?
Top
blucero
3 Posts
0
July 31st, 2013 16:00
Thank you for the response, but unfortunately neither of those commands seem to work, If I do a show p? the results don’t show a ‘power’ command at all.
HOSTNAME#show power supply
^
% Error: Invalid input at "^" marker.
HOSTNAME#show power detail
^
% Error: Invalid input at "^" marker.
HOSTNAME#
blucero
3 Posts
0
August 8th, 2013 00:00
Force10 Networks Real Time Operating System Software
Force10 Operating System Version: 1.0
Force10 Application Software Version: 7.7.1.2
Copyright (c) 1999-2008 by Force10 Networks, Inc.
Build Time: Fri Apr 10 23:33:13 PDT 2009
Build Path: /sites/sjc/work/sw/build/build9/E7-7-1/SW/SRC
System image file is "flash://FTOS-EF-7.7.1.2.bin"
Chassis Type: E1200
Control Processor: IBM PowerPC 405GP (rev D) with 536870912 bytes of memory.
Route Processor 1: IBM PowerPC 405GP (rev D) with 1073741824 bytes of memory.
Route Processor 2: IBM PowerPC 405GP (rev D) with 1073741824 bytes of memory.