Unsolved
1 Rookie
•
26 Posts
0
171
July 12th, 2022 12:00
Example ACL
I need to add a VLAN to our layer 3 switch. It's a Dell 4000 series. I need this VLAN to not be routed to the other VLANs nor them to it. But I need it to have an Ip address for clients on this VLAN to receive an Ip via our DHCP server. VLAN routing is turned on for the other VLANS. Can someone give me an example what I'd need for an ACL to do this? Say the new VLAN is VLAN 100 and we have VLANs 10, 20 , 30 etc.
0 events found
No Events found!
DELL-Joey C
Moderator
•
4.2K Posts
•
20.9K Points
0
July 12th, 2022 19:00
Hello @djhurt1,
Basically, for configuration, we are unable to provide in depth steps as there is no detailed documentation for us to provide to you to refer. Here's a general IP ACL configuration example though: https://dell.to/3aA9X5u
If you're looking for the public response to your enquiry, we might need to wait for others to feedback about their opinion.