Unsolved
1 Message
0
342
November 13th, 2021 02:00
How do I replace the 2 spine switch (STP) with no downtime?
Hi,
I have 2 spine switches which needs to be replaced.
They are configured with VLT and one of the spine switch is a STP root bridge.
How do I replace the 2 spine switches with no downtime?
No Events found!
DELL-Young E
Moderator
•
5.4K Posts
•
37 Points
0
November 14th, 2021 20:00
Hi, thanks for choosing Dell.
In VLT, if one switch(primary) goes down, the second switch would work as primary.
First , backup of both switch configuration(startup config, running-config, (startup.xml if it is Os10 firmware)).
Then, replace primary switch and restore configuration on new replaced switch. After that check VLT sync up between new switch and working switch. If you see everything is working well then so the same process on secondary switch replacement.
https://dell.to/30nAGNa