Unsolved
1 Rookie
•
14 Posts
0
256
May 8th, 2022 18:00
how to config a trunk on stack S4810
I have three S4810 switch stack with stack-group0 and group1,
I want:
ten 0/26 as a trunk port and allow vlan 5 and vlan 2 and the default vlan 1 pass.
ten 1/47 in vlan 5
ten 1/46 in vlan 2
other ports are in default vlan 1
ten 0/26 connect to another S4810 ,
how can i config the two switch?
No Events found!
DELL-Joey C
Moderator
•
4.2K Posts
•
21K Points
0
May 9th, 2022 00:00
Hi @xl.zhou,
What are the OS of the switches?
xl.zhou
1 Rookie
•
14 Posts
0
May 9th, 2022 00:00
FPQC-CenterSwitch#show system brief
Stack MAC : 00:01:e8:8b:42:77
Reload-Type : normal-reload [Next boot : normal-reload]
-- Stack Info --
Unit UnitType Status ReqTyp CurTyp Version Ports
------------------------------------------------------------------------------------
0 Management online S4810 S4810 9.7(0.0) 64
1 Standby online S4810 S4810 9.7(0.0) 64
2 Member online S4810 S4810 9.7(0.0) 64
xl.zhou
1 Rookie
•
14 Posts
0
May 9th, 2022 01:00
Hi :
OS version:
FPQC-CenterSwitch#show system brief
Stack MAC : 00:01:e8:8b:42:77
Reload-Type : normal-reload [Next boot : normal-reload]
-- Stack Info --
Unit UnitType Status ReqTyp CurTyp Version Ports
------------------------------------------------------------------------------------
0 Management online S4810 S4810 9.7(0.0) 64
1 Standby online S4810 S4810 9.7(0.0) 64
2 Member online S4810 S4810 9.7(0.0) 64
DELL-Joey C
Moderator
•
4.2K Posts
•
21K Points
0
May 9th, 2022 02:00
Hi,
I found an old post, can it help? https://dell.to/3Frdle5