Unsolved
This post is more than 5 years old
2 Posts
0
5403
February 6th, 2004 20:00
How To seperate Guests computers from network with 3324?
Hi,
I have a network at a hotel. Here is a quick overview:
CIsco 1702 Router
PowerConnect 3324
Each pc is directly switched.
I have a port going to a conference room where guest will need access to the internet only. With this switch can the port going to the conference room access the internet (T-1) connection only and not be able to see any other computer on my network. Basically, can I set the switch to block the users in the conference room from the network resources and other computers while still allowing internet access only?
Thanks,
Joe
No Events found!
uuallan
6 Posts
0
February 9th, 2004 21:00
If you are using VLANS, I would suggest setting up the conference room ports on a seperate VLAN which will isolate the traffic somewhat. Then I would set up strict ACLs on the conference ports only allowing the necessary Internet ports (80, 53, 110, etc).