Unsolved
This post is more than 5 years old
1 Rookie
•
12 Posts
0
1611
August 15th, 2018 05:00
N2048P / Shoretel QoS Setup
Hello,
We are in the process of installing a ShoreTel telephone system into our environment and its been interesting so far going from a flat network to a fully segregated VLAN environment, but its making great progress now.
The next issue I have is that I have the documentation for the ShoreTel/Mitel best practices and it features the following example config included below, obviously the commands don't marry up to current firmwares, so I would like to know what changes do I need to make to get this solution up and running.
We are running a core of 2x N2048P switches stacked in L3, we are running the latest firmware 6.5.1.5a36. Can someone assist in how I may achieve this on the N2048P class switching ?
Thanks,
Richard
Rich_Tech
1 Rookie
•
12 Posts
0
August 22nd, 2018 03:00
Hello Daniel,
I have worked through that easily enough, am I right in that I see that theres no need to enter the qos command specified and its all handled through classofservice now it seems?
I have programmed both the wrr cos-maps in now and the dscp-queues through classofservice, aside from the one command below - is this something thats old and been phased out perhaps ?
priority-queue out num-of-queues 4