Attachment uploads are currently disabled. This is a temporary situation and will resume as normal in the coming days.
Solved!
Go to SolutionM
mikesommer
1 Rookie
•
1 Message
•
2 Points
0
179
August 28th, 2025 02:53
N2224-ON Switch Problems
Brand new switch, started going thru the configuration process with the console open. Something happened half way through the process and now i just get the oni install menu options and it goes into an infinite loop and keeps rebooting. Is there a way to get it back to factory settings? Please help.
Dev Technosys explains that Dell N2224-ON switch problems often involve firmware bugs, configuration mismatches, or hardware issues. Common symptoms include port flaps, connectivity drops, or VLAN misbehavior. Verify firmware updates, reset to factory defaults if needed, check cabling, and review logs. Hire developers in UK for network troubleshooting and optimization.
DELL-Marco B
Moderator
•
3980 Posts
0
0
Posted August 28th, 2025 07:34
Hello,
To resolve the ONIE install loop on your N2224-ON switch:
Connect via console.
Reboot the switch and enter the ONIE menu.
Select ONIE: Rescue.
At the prompt, run: onie-uninstall
Reboot the switch.
This will reset the switch to factory defaults. Let us know if you need help reinstalling the OS.
DELL- Marco B
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!