N3048 boot code version

Hello,

did you try with show version command?

Yes. I am following the directions in the 6.5.4.20 upgrade manual and they say the version can be obtained from the console log on switch boot-up. I am trying to avoid rebooting the switch again. I also tried show tech-support.

#show version

Machine Description............... Dell EMC Networking Switch
System Model ID................... N3048
Machine Type...................... Dell EMC Networking N3048
Serial Number..................... CN0H784T2829847H0XXXXXX
Manufacturer...................... 0xbc00
Burned In MAC Address............. F8B1.564A.39C6
System Object ID.................. 1.3.6.1.4.1.674.10895.3058
SOC Version....................... BCM56340_A0
HW Version........................ 5
CPLD Version...................... 13
Image File........................ N3000AdvLitev6.5.4.20
Software Capability............... Stack Limit = 8, VLAN Limit = 1024

unit active backup current-active next-active
---- ----------- ----------- -------------- --------------
1 6.5.4.20 6.1.2.4 6.5.4.20 6.5.4.20
2 6.5.4.20 6.1.2.4 6.5.4.20 6.5.4.20

Hello lolcat2,

I think that #show switch  can give you that information.

Page 2270-2275: 

https://dell.to/3rrYdqG