Unsolved
This post is more than 5 years old
1 Rookie
•
68 Posts
0
1212
March 2nd, 2017 10:00
N4032F failover link
Hi
Is it possible to have 2 ports on a switch that port 1 is the primary path to the gateway and port 2 is to a secondary path. I need them to auto failover
Any Help would be great
thks
No Events found!
DELL-Josh Cr
Moderator
•
9.6K Posts
•
42.2K Points
0
March 2nd, 2017 15:00
Hi,
Is it to the same gateway? If both connections are going to the same device setting up a port channel is would probably work. Page 646 ftp://ftp.dell.com/manuals/common/networking_nxxcli_en-us.pdf
DELL-Josh Cr
Moderator
•
9.6K Posts
•
42.2K Points
0
March 3rd, 2017 10:00
If you just plug two cables in one should disable with spanning tree and failover if the other one loses connection.
glenn77
1 Rookie
•
68 Posts
0
March 3rd, 2017 10:00
Yes the same gateway
here is what we want to do
10.11.X.X >>>>10.11.0.1 Primary over our fiber (primary)
If fiber cut then auto failover via an ISP over MPLS Network back to our central office gateway 10.11.0.1
thks