UNSOLVED

glenn77

updated

10 years ago

G

glenn77

1 Rookie

68 Posts

0

3744

February 8th, 2017 12:00

N4032F Management IP problems

Hi

After I get a New N4032F switch I can assign an IP and default gateway to vlanXX, then if I recover the device to redeploy it using another vlan....lets say vlan1 and try to assign it an different IP it would take it

I get this warning

Warning! Notice! The configured default gateway will not take effect until an interface belonging to
 the same subnet as the configured Gateway is created and activated.

I have deleted the existing config and reset it back to factory defaults and it still cannot ping itself

Please Help

thks

Glenn

  • DELL-Josh Cr

    Community Manager

    9694 Posts

    43679 Points

    2710

    0

    Posted February 8th, 2017 16:00

    Hi,

    What firmware version are you using? Are you using the out of band management or in band management?

  • DELL-Josh Cr

    Community Manager

    9694 Posts

    43679 Points

    2710

    0

    Posted February 9th, 2017 07:00

  • glenn77

    1 Rookie

    68 Posts

    2710

    0

    Posted February 9th, 2017 07:00

    console(config-if-vlan1)#ip address 172.16.3.9 255.255.0.0 secondary

    Failed to set IP address on interface.

    console(config-if-vlan1)#ip address 172.16.3.9 255.255.0.0

    console(config-if-vlan1)#exi

    console(config)#exi

    console#ping 172.16.3.9
     Pinging 172.16.3.9 with 0 bytes of data:


    ----172.16.3.9 PING statistics----
    4 packets transmitted, 0 packets received, 100% packet loss
    round-trip (msec) min/avg/max = <10/<10/<10

  • glenn77

    1 Rookie

    68 Posts

    2710

    0

    Posted February 9th, 2017 07:00

    In band management

    Ver 6.2.7.2

    It seems that once I first set an IP and gateway ten it sets it in stone and cannot be changed

    it can be vlan1 or any other vlan I create one crack at it and then its over :(

  • schrorg

    9 Posts

    2710

    0

    Posted February 14th, 2017 12:00

    Hi,

    I guess, this would be the case if the vlan is down.

    Is there any active switch port in vlan 1?

    Cheers,

    Robin