Unsolved
1 Message
0
193
April 1st, 2022 06:00
Not able to apply ipv4 and ipv6 access-rules
ip access-list NETBIOS-LLMNR
1000 deny udp any any range 137 138
1010 deny tcp any any eq 139
1020 deny udp any any eq 5355
1030 permit every
exit
ipv6 access-list NETBIOS-LLMNR6
1000 deny udp any any range 137 138
1010 deny tcp any any eq 139
1020 deny udp any any eq 5355
1040 permit every
exit
interface vlan 1
ip address 192.168.20.201 255.255.254.0
ip access-group NETBIOS-LLMNR in 1
exit
interface vlan 22
ip access-group NETBIOS-LLMNR in 1
exit
interface vlan 24
ip access-group NETBIOS-LLMNR in 1
exit
when I try to add the ipv6 acl I get the following error message.
interface vlan 1
ipv6 traffic-filter NETBIOS-LLMNR6 in 1
Failure Information
---------------------------------------
VLANs failed to be configured : 1
---------------------------------------
VLAN Error
---------------------------------------
VLAN 1 ACL is incompatible with ACLs already configured on this interface and direction.


DELL-Josh Cr
Community Manager
•
9.7K Posts
•
43.5K Points
0
April 1st, 2022 10:00
Hi,
Which switch are you using and which OS version? Are those the only ACLs?