NTP Master on Dell OS10 OOB Interface

Hello,

yes you can, here fore example you can see at page 23

Dell EMC Networking OS10 Enterprise Edition Switch Configuration Guide for VxRail featuring S5200F-ON

HI,

Thanks for the reply, actually am looking to create the OOB interface as the NTP master; so other switches in the OOB Network sync their time, Please let me know if that is possible 

For this it is an advanced configuration, you have to be followed by an expert in networking. Can you contact technical support for networking?

Thanks

Hi Marco,

So, this is a supported configuration from OS10 right? or do i need to check with technical support if this is a supported configuration or not ?

Hi,

Unfortunately, it is not possible to configure an OS10 switch to act as an NTP server. OS10 switches can be configured to act as NTP clients to synchronize their time with an external NTP server, but they do not have the capability to serve as an NTP server themselves.

But i could see NTP Master is supported in OS 10, Please see the link below

https://www.dell.com/support/manuals/en-us/smartfabric-os10-emp-partner/smartfabric-os-user-guide-10-5-1/ntp-master?guid=guid-e87d0302-cfb4-49b5-a2d7-a1ac422da6cf&lang=en-us

@Anjaz​ 

For anyone else that lands here - as that link says, only MX series switches provide an NTP server. This is not a generic OS10 capability.

Supported on the MX9116n and MX5108n switches in Full Switch mode starting in release 10.4.0E(R3S). Also supported in SmartFabric mode starting in release 10.5.0.1