UNSOLVED
J
jamiemwanza
1 Rookie
•
42 Posts
0
2727
May 14th, 2012 09:00
power connect 6224
I have created three vlans:
Vlan 10 management
Vlan 20 vmtraffic
vlan 30 iSCSI
I want to be able to connect my stacked switches 6224 with firmware 3.3.3.3 to another switch say 3com or Cisco Lynksis. I am in a bubble on how to create the uplink so that i am able to access my server environment in vlan 20. Simply put how do i get to see my server environment in vlan 20? without enabling routing. i will need to have an offsite replication as soon as i get this config running. My config below:
stack#show running-config
!Current Configuration:
!System Description "PowerConnect 6224, 3.3.3.3, VxWorks 6.5"
!System Software Version 3.3.3.3
!Cut-through mode is configured as disabled
!
configure
vlan database
vlan 10,20,30
vlan routing 20 1
exit
hostname "stack"
stack
member 1 1
member 2 1
member 3 1
exit
ip address 192.168.100.1 255.255.255.0
ip address vlan 10
lacp system-priority 120
interface vlan 10
name "access"
exit
interface vlan 20
name "vmtraffic"
routing
ip address 192.168.103.1 255.255.255.0
exit
interface vlan 30
name "iSCSI"
exit
!
interface ethernet 1/g3
spanning-tree portfast
mtu 9216
switchport access vlan 30
exit
!
interface ethernet 1/g4
spanning-tree portfast
mtu 9216
switchport access vlan 30
exit
!
interface ethernet 1/g5
spanning-tree portfast
mtu 9216
switchport access vlan 30
exit
!
interface ethernet 1/g6
spanning-tree portfast
mtu 9216
switchport access vlan 30
exit
!
interface ethernet 1/g7
spanning-tree portfast
mtu 9216
switchport access vlan 30
exit
!
interface ethernet 1/g8
spanning-tree portfast
mtu 9216
switchport access vlan 30
exit
!
interface ethernet 1/g9
spanning-tree portfast
mtu 9216
switchport access vlan 30
exit
!
interface ethernet 1/g10
spanning-tree portfast
mtu 9216
switchport access vlan 30
exit
!
interface ethernet 1/g11
switchport mode general
switchport general allowed vlan add 10,20
switchport general allowed vlan remove 1
exit
!
interface ethernet 1/g12
switchport mode general
switchport general allowed vlan add 10,20
switchport general allowed vlan remove 1
exit
!
interface ethernet 1/g13
switchport mode general
switchport general allowed vlan add 10,20
switchport general allowed vlan remove 1
exit
!
interface ethernet 1/g14
switchport mode general
switchport general allowed vlan add 10,20
switchport general allowed vlan remove 1
exit
!
interface ethernet 1/g15
spanning-tree portfast
mtu 9216
switchport mode general
switchport general allowed vlan add 10,20
switchport general allowed vlan remove 1
exit
!
interface ethernet 1/g16
spanning-tree portfast
mtu 9216
switchport mode general
switchport general allowed vlan add 10,20
switchport general allowed vlan remove 1
exit
!
interface ethernet 2/g3
spanning-tree portfast
mtu 9216
switchport access vlan 30
exit
!
interface ethernet 2/g4
spanning-tree portfast
mtu 9216
switchport access vlan 30
exit
!
interface ethernet 2/g5
spanning-tree portfast
mtu 9216
switchport access vlan 30
exit
!
interface ethernet 2/g6
spanning-tree portfast
mtu 9216
switchport access vlan 30
exit
!
interface ethernet 2/g7
spanning-tree portfast
mtu 9216
switchport access vlan 30
exit
!
interface ethernet 2/g8
spanning-tree portfast
mtu 9216
switchport access vlan 30
exit
!
interface ethernet 2/g9
spanning-tree portfast
mtu 9216
switchport access vlan 30
exit
!
interface ethernet 2/g10
spanning-tree portfast
mtu 9216
switchport access vlan 30
exit
!
interface ethernet 2/g11
spanning-tree portfast
mtu 9216
switchport mode general
switchport general allowed vlan add 10,20
switchport general allowed vlan remove 1
exit
!
interface ethernet 2/g12
spanning-tree portfast
mtu 9216
switchport mode general
switchport general allowed vlan add 10,20
switchport general allowed vlan remove 1
exit
!
interface ethernet 2/g13
spanning-tree portfast
mtu 9216
switchport mode general
switchport general allowed vlan add 10,20
switchport general allowed vlan remove 1
exit
!
interface ethernet 2/g14
spanning-tree portfast
mtu 9216
switchport mode general
switchport general allowed vlan add 10,20
switchport general allowed vlan remove 1
exit
!
interface ethernet 2/g15
spanning-tree portfast
mtu 9216
switchport mode general
switchport general allowed vlan add 10,20
switchport general allowed vlan remove 1
exit
!
interface ethernet 2/g16
spanning-tree portfast
mtu 9216
switchport mode general
switchport general allowed vlan add 10,20
switchport general allowed vlan remove 1
exit
!
interface ethernet 3/g3
spanning-tree portfast
mtu 9212
switchport access vlan 30
exit
!
interface ethernet 3/g4
spanning-tree portfast
mtu 9212
switchport access vlan 30
exit
!
interface ethernet 3/g5
spanning-tree portfast
mtu 9212
switchport access vlan 30
exit
!
interface ethernet 3/g6
spanning-tree portfast
mtu 9212
switchport access vlan 30
exit
!
interface ethernet 3/g7
spanning-tree portfast
mtu 9212
switchport access vlan 30
exit
!
interface ethernet 3/g8
spanning-tree portfast
mtu 9212
switchport access vlan 30
exit
!
interface ethernet 3/g9
spanning-tree portfast
mtu 9212
switchport access vlan 30
exit
!
interface ethernet 3/g10
spanning-tree portfast
mtu 9212
switchport access vlan 30
exit
!
interface ethernet 3/g11
spanning-tree portfast
mtu 9216
switchport mode general
switchport general allowed vlan add 10,20
switchport general allowed vlan remove 1
exit
!
interface ethernet 3/g12
spanning-tree portfast
mtu 9216
switchport mode general
switchport general allowed vlan add 10,20
switchport general allowed vlan remove 1
exit
!
interface ethernet 3/g13
spanning-tree portfast
mtu 9216
switchport mode general
switchport general allowed vlan add 10,20
switchport general allowed vlan remove 1
exit
!
interface ethernet 3/g14
spanning-tree portfast
mtu 9216
switchport mode general
switchport general allowed vlan add 10,20
switchport general allowed vlan remove 1
exit
!
interface ethernet 3/g15
spanning-tree portfast
mtu 9216
switchport mode general
switchport general allowed vlan add 10,20
switchport general allowed vlan remove 1
exit
!
interface ethernet 3/g16
spanning-tree portfast
mtu 9216
switchport mode general
switchport general allowed vlan add 10,20
switchport general allowed vlan remove 1
exit
!
interface port-channel 1
switchport mode general
switchport general allowed vlan add 10,20
switchport general allowed vlan remove 1
sketchy00
203 Posts
492
0
Posted May 14th, 2012 23:00
Hi Jamie,
If you don't want to enable routing on the PowerConnects, then you will need the upstream device to handle it all - at layer 3. So imagine if you had a physical router upstream, you'd want to have those uplinks as untagged access or general ports. At that point, it needs to be understanding things at layer 3, and will route accordingly. That should simplify matters if you are dealing with other vendors. This is not necessarily the only way to go, but it may be the simplest for now. (It is what I had to do when I was running switches on my LAN that supported everything but interVLAN routing). The only challenge that you'd have is making sure that you have that upstream L3 switch routing accordingly. But the nice part is that your configuration of that upstream switch can really happen independantly of the powerconnects. Just test out your routing with a couple of PCs to make sure it works, and you'll be good to go.
There's always some smart guys out here that may provide better ideas than this. Hopefully you'll have a couple of options to choose from befort it's all said and done. Apologies if I missed what you were asking for.