Unsolved
This post is more than 5 years old
8 Posts
0
72539
July 30th, 2014 03:00
powerconnect 2848 cannot ping after change port pvid
hi, i have set powerconnect 2848 to ip 172.16.0.250 , and plug port 48,
after changed port 48 pvid to 48 , then cannot open open manager and cannot ping 172.16.0.250,
only pvid 1 ports can do. is my switch have problems?
No Events found!
sum100
8 Posts
0
August 4th, 2014 19:00
we cannot add port 48 to vlan 1 when port 48 pvid is 48, this is the bug of dell switch ?
the open manager must auto add to all vlan! this problem not find at other brands switch , like cisco , netgear , tp-link ......
sum100
8 Posts
0
August 5th, 2014 19:00
cannot change anythings on group vlan1 , cannot add port to vlan1 when pvid is not 1.
sum100
8 Posts
0
August 6th, 2014 19:00
port1 proxy for all user pc , no vip
port 2-45 , all user pc , server (22,23,24 LAG)
port 47 , vip router , no user pc
port 48 , vip pc switch
is need set port 46 pvid1 for manager only on dell switch
sum100
8 Posts
0
August 7th, 2014 19:00
in tp-link port base vlan , i cannot do in dell 2848 in same way,
because vlan1 cannot add any port when pvid is not 1.
port 1 proxy go to any ports , not to port 47, 48 (vip router , switch)
sum100
8 Posts
0
August 10th, 2014 19:00
this is the dead end?
sum100
8 Posts
0
August 13th, 2014 03:00
if change the last port pvid1 to pvid2 , i cannot config this switch forever.
sum100
8 Posts
0
August 17th, 2014 19:00
in user manual , it seem no way to manage it with serial connection ,
see:
www.experts-exchange.com/.../Q_27974932.html