Powerconnect 5500 and Openmanage Network Manage setup

Question

Hi,

I try to configure Network Manage to connect to my 5548 x 5 stack.

I have no problem to log to web OpenManage Switch Administrator or telnet and ssh console.

But when i try to use Network Manage I only got the "No valid auths" message. (I even created a new level 15user)

I looked for a post upon this subject, and found only one about SSH. But it does not help me.

Is there a written procedure about the correct way to configure the switch and Network Manage or could anyone help me ?

Thanks for your help and sorry for my english.

DELL-Willy M · Answer

Have you tried the default for the first time login to OpenManage Network Manager?

Username: admin

Password: admin

Here is some useful documentation:

Dell OpenManage Network Manager Quick Set up Guide | Dell www.dell.com/.../pd

User Guides and Manuals:

support.dell.com/.../domnwm

Video Tutorials:

www.dell.com/.../network_management_video

Hope this helps,

Keep us updated if you can.

RomanH-NC · Answer

Hi, did you ever figure this out? I'm having the same problem: everything I try but still get 'No Valid Auths.' Tried with Telnet, SSH, but no go. Thanks for any help.

Networking General

Powerconnect 5500 and Openmanage Network Manage setup

Was this post helpful?