UNSOLVED
PowerConnect 6248 show cpu utilization
This command works in our 3448's and 5234's, so why doesn't it work in the 6248? Is there an equivalent command that I'm not finding? I'd like to know what kind of cpu load the switch is under so that I can add more vlans without worrying about the load.
Regards,
Viralbyte
stormytoad
44 Posts
4369
0
Posted October 19th, 2007 14:00
Firmware 2.0.0.12 does have this feature. Here is a dump from one of my stacks:#show process cpuMemory Utilization ReportStatus Bytes
------ ----------
Free 26965456
Alloc 169197312Task Utilization ReportTask Utilization
----------------------- -----------
osapiTimer 1.20%
bcmL2X.0 0.75%
bcmCNTR.0 0.25%
bcmLINK.0 0.45%
bcmRX 0.30%
bcmNHOP 0.05%
MAC Send Task 0.15%
RMONTask 0.05%
dot1s_timer_task 0.15%
ipMapForwardingTask 0.15%
tL7Timer0 0.05%
Kernel/Interrupt/Idle 96.45%Total 100.00%GYMCORE#show verImage Descriptionsimage1 : default image
image2 :
Images currently available on Flash--------------------------------------------------------------------
unit image1 image2 current-active next-active
--------------------------------------------------------------------1 2.0.0.12 1.0.4.3 image1 image1
2 2.0.0.12 1.0.4.3 image1 image1#
Crzywolf
93 Posts
4369
0
Posted September 14th, 2007 17:00