Remove Port From Native Vlan / PC 5224

I'm having a hard time assigning VLANs on my PowerConnect 5224.  I can't seem to remove ports from Vlan1 to save my life.  I want specifically to place et 1/1 and 1/22 in vlan 20.  I want et 1/22 to be a .1q trunk-port to aggrigate multiple vlan's yet to be configured.

I've tried "no switchport native vlan 1" and "switchport allowed vlan remove 1" and any other combination I can think of to remove this port from vlan 1 but I can't seem to make it work.  I get something similar to Failed to remove from egress list on ethernet 1/22.

Typing conf -> int eth 1/22 -> switchport native vlan 20 gives me

Vty-0(config-if)#switchport native vlan 20
Failed to set pvid on ethernet 1/22

Attached is my config.  How can I remove 1/22 and 1/1 from vlan 1?  Any help would be greatly appreciated.

Vty-0#sh run
building running-config, please wait.....
!
!
!
snmp-server community private rw
snmp-server community public ro
!
!
username admin access-level 15
username admin password 7 21232f297a57a5a743894a0e4a801fc3
username guest access-level 0
username guest password 7 084e0343a0486ff05530df6c705c8bb4
enable password level 15 7 1b3231655cebb7a1f783eddf27d254ca
!
!
!
vlan database
 vlan 1 name DefaultVlan media ethernet state active
 vlan 20 name base media ethernet state active
 vlan 21 name temp21 media ethernet state active
!
!
!        
!
!
!
interface ethernet 1/1
 switchport allowed vlan add 1 untagged
 switchport native vlan 1
!
interface ethernet 1/2
 switchport allowed vlan add 1 untagged
 switchport native vlan 1
!
interface ethernet 1/3
 switchport allowed vlan add 1 untagged
 switchport native vlan 1
!
interface ethernet 1/4
 switchport allowed vlan add 1 untagged
 switchport native vlan 1
!
interface ethernet 1/5
 switchport allowed vlan add 1 untagged
 switchport native vlan 1
!
interface ethernet 1/6
 switchport allowed vlan add 1 untagged
 switchport native vlan 1
!
interface ethernet 1/7
 switchport allowed vlan add 1 untagged
 switchport native vlan 1
!
interface ethernet 1/8
 switchport allowed vlan add 1 untagged
 switchport native vlan 1
!
interface ethernet 1/9
 switchport allowed vlan add 1 untagged
 switchport native vlan 1
!
interface ethernet 1/10
 switchport allowed vlan add 1 untagged
 switchport native vlan 1
!
interface ethernet 1/11
 switchport allowed vlan add 1 untagged
 switchport native vlan 1
!
interface ethernet 1/12
 switchport allowed vlan add 1 untagged
 switchport native vlan 1
!
interface ethernet 1/13
 switchport allowed vlan add 1 untagged
 switchport native vlan 1
!
interface ethernet 1/14
 switchport allowed vlan add 1 untagged
 switchport native vlan 1
!
interface ethernet 1/15
 switchport allowed vlan add 1 untagged
 switchport native vlan 1
!
interface ethernet 1/16
 switchport allowed vlan add 1 untagged
 switchport native vlan 1
!
interface ethernet 1/17
 switchport allowed vlan add 1 untagged
 switchport native vlan 1
!
interface ethernet 1/18
 switchport allowed vlan add 1 untagged
 switchport native vlan 1
!
interface ethernet 1/19
 switchport allowed vlan add 1 untagged
 switchport native vlan 1
!
interface ethernet 1/20
 switchport allowed vlan add 1 untagged
 switchport native vlan 1
!
interface ethernet 1/21
 switchport allowed vlan add 1 untagged
 switchport native vlan 1
!
interface ethernet 1/22
 switchport allowed vlan add 1,20 untagged
 switchport native vlan 1
!
interface ethernet 1/23
 switchport allowed vlan add 1 untagged
 switchport native vlan 1
!
interface ethernet 1/24
 switchport allowed vlan add 1 untagged
 switchport native vlan 1
!
!
!
interface vlan 1
 ip address 10.12.102.45 255.255.255.128
!
!
!
!
!
!
ip default-gateway  10.12.102.1
!
!
!
!
!
!
!
!
!
!
!
!
!
!
line console
!
!
line vty
!
!
!
end      
!
Vty-0#