This post is more than 5 years old
1 Rookie
•
3 Posts
0
1738
April 24th, 2020 05:00
S4148F-ON GVRP
Hi,
Is possible to configure S4148F with VLAN GVRP ?
I have two S4148F in VLT mode, and I want to configure VLAN client on only one switch, and automatic replicate vlans to other VLT member...
The hardware specifications says it supports GVRP but I cant find the commands on the switch..
It's running OS10 10.4.3.4..
No Events found!
DELL-Josh Cr
Community Manager
•
9.6K Posts
•
42.8K Points
0
April 24th, 2020 11:00
It may have been in an older version and removed.
DELL-Josh Cr
Community Manager
•
9.6K Posts
•
42.8K Points
0
April 24th, 2020 14:00
no switchport trunk allowed vlan 10
DANILO_MONTAGNA
1 Rookie
•
3 Posts
0
April 24th, 2020 10:00
I updated the switch to the latest OS10 version (10.5.1.1), but no way to list GVRP as a feature..
The hardware specifications says it supports, may it is wrong described...
file: dell-emc-networking-S4100-series-spec-sheet.pdf
Also, the User Guide describes commands like "show vlan" where I can see (G)-VRP listed as a tag option for vlan..
But if you do a "show vlan" into the switch, it does not show... the only options is (U) and (T).
DELL-Josh Cr
Community Manager
•
9.6K Posts
•
42.8K Points
0
April 24th, 2020 10:00
Hi,
I do not see any commands for configuring it. It may “support” it with a different open networking OS.
DANILO_MONTAGNA
1 Rookie
•
3 Posts
0
April 24th, 2020 14:00
I see... thanks..
Also, there is no option for remove a specifc vlan from a trunk port without removing the trunk mode from the port?
example: switchport trunk allowed vlan 5,10,15
there is no command to remove only vlan 10 from the commando above? there is no "switchport trunk remove vlan" command...