1 Rookie
•
2 Posts
0
29
November 25th, 2025 04:37
SNMP PowerSwitch S5248F - OIDS
Hi.
I'm trying to monitor the usage of cpu and memory on the switch and the internal temperature of the switch through snmp, but I don't know where to check the OID value for that. Where can I check it?
I already have the mib file
Or can you tell me the value of each OID?
The OS version is 10.6.0.5
The model is PowerSwitch S5248F
No Events found!
DELL-Erman O
Moderator
•
2.9K Posts
1
November 25th, 2025 09:41
Hi, for example you can upload full MIB file to "winscp" to finish upload. Then you can review it. I looked up to inour community and I found below reference you can check them.
CPU utilization:
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.91.3.6.1.4.1.674.10895.5000.2.1.1.1.5Internal temperature:
1.3.6.1.4.1.674.11000.5000.100.4.1.1.3.1.11.1.3.6.1.2.1.25.2.3.1.5.<index>.1.3.6.1.2.1.25.2.3.1.6.<index>Hope that works!
seung-min
1 Rookie
•
2 Posts
0
November 26th, 2025 03:16
@DELL-Erman O
Thanks to you, the memory part is coming out
Is there any OID value that gives cpu and memory utilization in % format?
DELL-Joey C
Moderator
•
4K Posts
1
November 26th, 2025 04:29
Hi,
Unfortunately, SNMP OID itself usually returns raw integer (e.g.,
12for 12%). But I'm unsure of if the monitoring tool may typically show %. We do not have specific script for any of the tools, only the OID.