Unsolved
This post is more than 5 years old
2 Posts
0
1667
July 26th, 2018 16:00
Some ports on N4032F stopped working
Out of the blue, after a shutdown, 4 ports from this switch stopped working. I can use the same cable in any other port and it will work, but i don't get any link on those 4 ports. Oddly enough does display when the transciever is connected and disconnected, but no link.
Already tried shutdown/no shutdown to no availe
Is there a way to make sure the port is actually dead? Or could i be missing something that might fix it?
Thanks!
No Events found!
ArturoCamacho
2 Posts
0
July 30th, 2018 12:00
Logging does show optics being connected and disconnected on the port.
<188> Jul 30 18:32:54 0.0.0.0-1 TRAPMGR[trapTask]: traputil.c(721) 30421 %% INSERT_OPTICS_PLUS: Optics SFP+ inserted in Te1/0/2
<188> Jul 30 18:32:59 0.0.0.0-1 TRAPMGR[trapTask]: traputil.c(721) 30422 %% REMOVED_OPTICS_PLUS: Optics SFP+ removed from Te1/0/2
Unfortunately no link with the loopback test. Oddly enough it's the first 4 ports that stopped working. Everything else looks fine. Think it's anything that could be easily fixed?