UNSOLVED
Stack of two Dell N4032F switch, Crashing/Restarting
Hi Guys, I had a LACP error on a stack of two Dell N4032F switch, see below the logs : - DOT3AD[dtlTask]: dot3ad_lacpm.c(245) 7720 %% Error in processing lag pdu 2 - DOT3AD[dtlTask]: dot3ad_lacpm.c(245) 7719 %% Error in processing lag pdu 2 - DOT3AD[dtlTask]: dot3ad_lacpm.c(245) 7718 %% Error in processing lag pdu 2 The stack restarted alone after two hours of time, below the log displayed during reboot : - The system is restarting due to the inconsistent state I thank you in advance for your answer. Best regards, BZI
PDIT-10405
1 Message
0
0
Posted October 27th, 2023 11:21
Hi,
we are also having the same issues with our DELL N4032F switch in stack mode.
Firmware up to date / Switch dianostics send to Dell after a while they replaced both switches but the problem still persist. Now the switch stack 2 randomly reboots every 2 weeks or so. Any further help or fix will be appreciated.
RegardsDELL-Marco B
Moderator
•
3980 Posts
0
October 27th, 2023 13:40
Hello,
if you already contact our technical support and we already replaced the switch, the service call is still opened. When it happened? I can verify the status of the request.
Thanks
DELL-Josh Cr
Community Manager
•
9694 Posts
•
43679 Points
1024
0
Posted July 15th, 2019 10:00
Hi,
Is the firmware up to date? Can you reseat the connections between the switches?