This post is more than 5 years old
3 Posts
0
46658
August 10th, 2015 00:00
Switch N3024 snmp trouble with openmanage.
Hi
I have two new N3024 that i want to manage with openmanage essentials.
I have configured N3024 with a comunity name and also set up a notification recipients.
In openmanage the two switches shows upp under devices.
But they both have a yellow warning on them.
if i try to go to the web interface from openmanage it takes me to adress 0.0.0.0
Under General / health in the switch i can see nothing wrong.
What is the trouble ?
I also trying to get the N3024 to send traps.
I test this with linkup and linkdown.
In the trap log on the switch i can that a trap is generated but in openmanage nothing comes in.
I have no problem with traps from other hardware.
Any suggestions on what i am doing wrong ?
Jorgen69
3 Posts
0
August 11th, 2015 01:00
Hi
Thanks for your answer.
Yes the Openmanage has it's community configured.
I use same community that i also use for alla servers and i get traps from them without problem.
The switch has firmware 6.0.1.3.
So a upgrade will properly help.
Maybe a upgrade will help with the traps problem too?
Jorgen69
3 Posts
0
September 1st, 2015 23:00
I have now upgraded the firmware on the switches and traps now works perfectly.
The webadress is now also correct in the openmanage.
But the yellow triangel is still there but i think it has something to do with power supply.
There is only one in the switch but openmanage thinks there should be two.
But i can live with that,
Thank you.