Attachment uploads are currently disabled. This is a temporary situation and will resume as normal in the coming days.
Solved!
Go to SolutionC
chrisduk112
1 Rookie
•
67 Posts
0
9709
September 3rd, 2015 10:00
switch
HI
I have a dell switch that we bought in January, i cant recall the model at top of my head but it was a 24 port 10Gbit SFP+ switch
I have console access to the switch
what commands can i run to list the config for each port? some are set to MTU 9000 and some are not.
I also need to know, say i find port 6 is MTU 1500 and i need to change it to 9000 what is the command?
finally once i'm done what is the command to save the config for boot?
DELL-Josh Cr
Community Manager
•
9737 Posts
•
44383 Points
360
0
Posted September 3rd, 2015 11:00
Hi,
You can use the show interfaces configuration command to list the settings for the port and see the MTU size. Page 441 http://downloads.dell.com/Manuals/Common/PowerConnect-Nxxx6.2_CLIRef_en-us.pdf
If you want to set all interfaces to a larger MTU you can use the command system jumbo mtu which will set all interfaces at once. Page 470