Unsolved
This post is more than 5 years old
2 Posts
0
4132
April 3rd, 2006 16:00
Tagging VLAN 1 on 5316M possible ?
Hi,
I have set up an VMWare ESX Server on my 1855 connected to the built-in 5316m switch.
Now I need to make my management VLAN 1 ( together with some other VLANS ) visible to the esx server. ( I know using VLAN1 as mgmt lan is not a good idea but we can´t change it now )
But the ESX-Server can only see tagged packets !
The question ist: How can I configure the switch to tag
VLAN1, VLAN2, VLAN3 and VLAN4 ?
On Cisco switches this can be done by changing the native VLAN. But changing the native VLAN on the 5316m does work. VLAN1 is still untagged.
regards
Stephan Buhre
No Events found!
DELL-Cuong N.
1K Posts
0
April 3rd, 2006 17:00
Unfortunately I don't think you can tag the management VLAN 1 on this switch. It has nothing to do with the native VLAN.
Cuong.
sbuhre
2 Posts
0
April 3rd, 2006 18:00
Hi,
this is bad news. But I read somewhere that a cisco switch module is available for the 1855 blade enclosure. Is this correct ?
regards
Stephan