This post is more than 5 years old
26 Posts
0
92672
March 9th, 2012 16:00
Telnet Authentication Failed PowerConnect 7048
Hi
I have a powerconnect 7048, I configure the Out Of Band Interface. I enter telnet IP_Of_My_Switch, enter the root and password admin, when I enter the enable command I receive authentication failure. How is it possible to activate the telnet on the Out of Band Interface?
Thanks
DS
0 events found
No Events found!
sidavid
26 Posts
1
March 9th, 2012 18:00
I found my issue, I have set the select authentification/Telnet/enable to enablelist.