Transceiver 3rd party

Question

Good Day Friends, we know that dell have many transceiver compatibility matrix for the dell network  devices, but I have a question , I have transceiver huawei P/N : 02310PVU Model : OSX080N04, 10GB-80KM-1550nm, and try to using it on Dell S4148F-ON, with Firmware OS10.5.2.3, but when i do show inventory media, the information is different like below :  1/1/40 SFP28 SFP28 25GBASE-SR-AOC 03T1184***** false does anyone can explain this..? because we have problem power tx from that device, here is when i check using : sh interface phy-eth 1/1/40 tranceiver , like below : SW# show interface phy-eth 1/1/40 transceiver SFP is present SFP1/1/40 Serial Base ID fieldsSFP1/1/40 Id = 3SFP1/1/40 Ext Id = 4SFP1/1/40 Connector = 7SFP1/1/40 Transceiver Code = 80000000SFP1/1/40 Encoding = 6SFP1/1/40 BR nominal = 103SFP1/1/40 Length(SFM) Km = 0SFP1/1/40 Length(OM3) 2m = 0SFP1/1/40 Length(OM2) 1m = 0SFP1/1/40 Length(OM1) 1m = 0SFP1/1/40 Length(copper) 1m = 0SFP1/1/40 Vendor Rev = 410SFP1/1/40 Laser wavelength = 1550nmSFP1/1/40 Tunable wavelength= 1550.0nmSFP1/1/40 Check code base = 121SFP1/1/40 Serial Extended ID fieldsSFP1/1/40 Options = 1562SFP1/1/40 BR max = 0SFP1/1/40 BR min = 0SFP1/1/40 Vendor SN = 03T118400975SFP1/1/40 Datecode = 200316SFP1/1/40 CheckCodeExt = 243 SFP1/1/40 Diagnostic Information=================================================================SFP1/1/40 Rx Power Measurement type = 104=================================================================SFP1/1/40 Temp High Alarm threshold = 80.0CSFP1/1/40 Voltage High Alarm threshold = 3.63mVSFP1/1/40 Bias High Alarm threshold = 120.0mASFP1/1/40 Tx power High Alarm threshold = 5.999922 dBmSFP1/1/40 Rx power High Alarm threshold = -5.000381 dBmSFP1/1/40 Temp Low Alarm threshold = -10.0CSFP1/1/40 Voltage Low Alarm threshold = 2.97mVSFP1/1/40 Bias Low Alarm threshold = 17.0mASFP1/1/40 Tx power Low Alarm threshold = -2.000395 dBmSFP1/1/40 Rx power Low Alarm threshold = -26.020601 dBm===============================================================SFP1/1/40 Temp High Warning threshold = 73.0CSFP1/1/40 Voltage High Warning threshold = 3.464mVSFP1/1/40 Bias High Warning threshold = 112.0mASFP1/1/40 Tx power High Warning threshold = 4.000023 dBmSFP1/1/40 Rx power High Warning threshold = -7.000571 dBmSFP1/1/40 Temp Low Warning threshold = -3.0CSFP1/1/40 Voltage Low Warning threshold = 3.134mVSFP1/1/40 Bias Low Warning threshold = 20.0mASFP1/1/40 Tx power Low Warning threshold = 0.000000 dBmSFP1/1/40 Rx power Low Warning threshold = -24.089354 dBm==================================================================SFP1/1/40 Temp High Alarm flag = FalseSFP1/1/40 Voltage High Alarm flag = FalseSFP1/1/40 Temp Low Alarm flag = FalseSFP1/1/40 Voltage Low Alarm flag = FalseSFP1/1/40 Temp High Warning flag = FalseSFP1/1/40 Voltage High Warning flag = FalseSFP1/1/40 Temp Low Warning flag = FalseSFP1/1/40 Voltage Low Warning flag = False====================================================================SFP1/1/40 Temperature = 35.093CSFP1/1/40 Voltage = 3.3VSFP1/1/40 Rate select state = false====================================================================SFP Channel = 0SFP Tx Bias Current = 0.0mASFP Tx power = no powerSFP Rx power = -12.225732 dBmSFP Bias High Alarm flag = FalseSFP Rx power High Alarm flag = FalseSFP Rx LOS state = FalseSFP Tx fault state = FalseSFP Tx disable state = TrueSFP Bias Low Alarm flag = FalseSFP Rx power Low Alarm flag = FalseSFP Bias High Warning flag = FalseSFP Rx power High Warning flag = FalseSFP Bias Low Warning flag = FalseSFP Rx power Low Warning flag = False

DELL-Marco B · Answer

Hello, probably something related to the transceiver compatibility. The issue is the same on other ports? Did you check this document? Maybe it can help you https://dell.to/2PtkPrk Thanks Marco

JARUM · Answer

Hi Marco,Thanks for your respon. yes,the issue is still the same when i plug into other port and port on another switch 4148F,of course i have check the compatibility, but we know that sometimesSFP 3rd party can work on switch dell.so i think it means that huawei tranceiver not compatible with dell. but it stranges me why dell detect the tranceiver as 25GB ..

DELL-Marco B · Answer

Yes pretty sure then that it is not compatibile. I cannot tell you why is detect as 25GB, let's see if other customer can have this answer.   Thanks   Marco

Networking General

Was this post helpful?