Hello, I am not sure if this question has been asked previously or not!!
Problem: I am able to deploy OS via MDT/WDS UEFI but OS got installed without the Network driver. this problem is only with this model, I do not have any problem with any other models I have imported the latest Dell Command | Deploy Driver Pack CAB, also imported the Intel-I2xx-825xx-Gigabit-Ethernet-Network-Controller_KNYK0_WIN_23.0.12.0_A06.EXE (Windows 10 x64).
Deployment share up-to-date.
BDD log shows it is reaching the right folder for drivers. M
Hello, I am not this questions has been previously or not!! Problem: I am able to deploy OS via MDT/WDS UEFI but OS got installed without the Network driver. this problem is only with this model, I do not have any problem with any other models I have imported the latest Dell Command | Deploy Driver Pack CAB, also imported the Intel-I2xx-825xx-Gigabit-Ethernet-Network-Controller_KNYK0_WIN_23.0.12.0_A06.EXE (Windows 10 x64). Deployment share up-to-date. BDD log shows it is reaching the right folder for drivers. MDT 8456 ADK 1809 (latest) Thanks for your help in advance,
Make sure you inject the WinPE10 driver CAB into your boot.wim IN BOTH INDEXES. For whatever reason with the 7060, I had issues until I injected into both indexes of boot.wim. Worked fine after that!
I am able to boot to PXE and OS is being deployed but the end of OS applied Network driver is not getting installed so the deployment is NOT continuing to install the application.
I am using the single TS for multiple Models. TS driver injection method is Set DriverGroup.
Unfortunately, This didn't work, As a workaround, I am injecting drivers twice in TS, once in Preinstall stage and Postinstall stage, as set DriverGroup.
pradeepgowda
11 Posts
3550
0
Posted April 30th, 2019 11:00
Thanks for the response, I shall try and update here,
the one you're referring to the newer than this 7060-win10-A05-WJ1NN.CAB?