UNSOLVED
Optional Type-C module OptiPlex Micro 7010
I don't know if this has been discussed before, but when i read the OptiPlex 7010 micro owners manual the board with the type-c port has 4 cables:
" 2. Connect the Type-C DisplayPort cable to the system board.
3. Connect the Type-C USB cable to the system board.
4. Connect the Type-C power cable to the system board.
5. Connect the Type-C signal cable to the system board. "
I found such boards with only 2 cables for USB and for video. What is the serial number of the part shown in the owners manual?
0
0
Posted November 12th, 2023 22:26
there is also
BZL, HOLDER, PWR CONNECTOR
USB Type-C Modulewith DP Alt Modeand Power DeliveryN0JM9 0
0
Posted November 12th, 2023 22:28
0
0
Posted November 13th, 2023 07:46
Ok, thanks, but I can't find those parts anywhere.
0
0
Posted November 13th, 2023 14:11
Chat w Dell sales on line for price/stock. It is a new model so unlikely you will find third party vendor yet.
0
0
Posted May 1st, 2024 12:13
@redxps630 where do you get part numbers from? I can't find any info about them on the web.
0
0
Posted May 1st, 2024 12:41
I confirmed with support that Y6F6D is the correct part number but there are none available now.
0
0
Posted July 23rd, 2024 09:51
Where to by for Dell Optiplex Micro 7010
0
0
Posted July 23rd, 2024 13:15
0
0
Posted August 27th, 2024 04:10
WARNING
There are a few Dell Daughter Boards listed on Amazon and Ebay, but many have cables that are the wrong length. Some Part Numbers also does NOT match the Dell Part Number. Even though they may list 7070 Micro compatibility, they may NOT fit. Read reviews on questionable Daughter Boards to make sure it will fit a Dell 7070 Micro
redxps630
11 Legend
•
16324 Posts
•
82868 Points
0
0
Posted November 12th, 2023 22:25
the DP/N is Y6F6D
USB Type-C Modulewith DP Alt Modeand Power Delivery
(edited)