UNSOLVED
Optiplex 3020 issue
Hi I have a optiplex 3020 and I took out the mother bord and I was trying to do some thing and when I put it back in and plugged all of the cables right and when go the turn it on the start button started to flash orange light 2 times and I try the on bord psu test and it work and I try out the disconnect the cables one by one and I thought it work when I go plug the hard drive n the system stops working what do I do
redxps630
11 Legend
•
16321 Posts
•
82859 Points
302
1
Posted January 15th, 2022 08:00
flash orange light 2 times:
Amber LED blinking code– The pattern is 2 blinks followed by a short pause then x number of blinks. for example,
2,2 system board, PSU or PSU cabling failure
you can try clear cmos settings by reset jumper on motherboard. no promise it would work.
if no change, get a spare working psu to test system board. if the test psu is 24 pin, you need to get a 24 to 8 pin adapter.