UNSOLVED
Dell T140 SATA cable
Good morning
I have a Dell T140 with H330 controller and 2 HDD installed.
The H330 controller is not mandatory for the T140, since the motherboard has a SATA port, so che H330 is optional.
I would like to REMOVE the H330 and connect the HDD to the SATA port of the motherboard.
Unfortunately the connector of the H330 is different than the one of the motherboard.
I really CAN NOT find any information about what type of cable do I need to use the motherboard SATA port.
thanks.
many thanks,
I had a look at GVDN3 and it seems to be a data only cable.
I try to explain: the cable that today connects the HDDs to the H330 has both data and power.
If I remove the cable I am using, I can not only replace it with the GVDN3.
And moreover I can not continue to use the cable I have today for power only, since on the HDd side there is just one connector for data+power
DELL-Josh Cr
Community Manager
•
9699 Posts
•
43744 Points
1421
0
Posted March 5th, 2020 09:00
The power cable part number is 3N9M7.
DELL-Josh Cr
Community Manager
•
9699 Posts
•
43744 Points
1405
0
Posted March 5th, 2020 17:00
That's right.
DiegoLopez
6 Operator
•
2668 Posts
1169
0
Posted April 13th, 2020 02:00
Hello R4nger,
I think you probably will get a better answer from the commercial department as we are technical support and our data could not be accurate. You can either search for this part on the Parts & Upgrades web or contact a local partner.
Regards.
DELL-Chris H
7 Practitioner
•
9682 Posts
•
48046 Points
1463
0
Posted March 4th, 2020 08:00
Steff70,
The cable needed to run the drive to the motherboard is part # GVDN3.
Let me know if this helps.
DELL-Chris H
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!