poweredge 2950 dimensions needed

Question

can anyone tell me the width and depth of the poweredge 2950? thanks Message Edited by hops33n on 02-14-2007 11:03 AM

gnitset · Answer

2U Rack mountable 29.31' (74.4cm) D x 17.5' (44.43cm) W x 3.4' (8.64cm) H with bezel attached Rack Weight 50.71 lbs (23 Kg), maximum configuration

JackJordan · Answer

This is why I love Google. I couldn't find this information anywhere, except for this thread. It's not even listed on the 'Official Dell 2950 Spec Sheet'

Pieh0 · Answer

Same here, 7 years later and this thread still delivers.

Groylott · Answer

2015 now, thread still delivers.

Bobaffett · Answer

2015, Delivering yet again

Dylannavis · Answer

2016 yet again!

ed1030 · Answer

And again.  Thank you for sharing this information!

hintss · Answer

The box is EOL'd, and this thread still delivers.

Dave B · Answer

2018 and still shipping crusty old servers around the US Thanks!

SamirD · Answer

And they still work!  Just got a 2950 fully configured and ready to go for more years of service...

vigie0109 · Answer

Me too

Mostafa.Musaad · Answer

2950 Server Information: Height 3.4″ Width 17.6″ Depth 29.79″ Weight 59lbs Wattage 750W Voltage 85-264 VAC, 47-63Hz Heat Dissipation 2697 BTU/hr maximum Operating Temperature 50F to 95F Maximum Inrush Current 55A for 10ms or less Dell Documentation PE2950 Manuals

PowerEdge Hardware General

Was this post helpful?

Height	3.4″
Width	17.6″
Depth	29.79″
Weight	59lbs
Wattage	750W
Voltage	85-264 VAC, 47-63Hz
Heat Dissipation	2697 BTU/hr maximum
Operating Temperature	50F to 95F
Maximum Inrush Current	55A for 10ms or less
Dell Documentation	PE2950 Manuals