13 Posts
0
796
August 24th, 2021 01:00
T330 and PERC H830
Hello,
Will PERC H830 work with PowerEdge T330?
If not could you please help me with choosing right PERC for my PowerEdge T330 and PowerVault MD1400 please.
No Events found!
13 Posts
0
796
August 24th, 2021 01:00
Hello,
Will PERC H830 work with PowerEdge T330?
If not could you please help me with choosing right PERC for my PowerEdge T330 and PowerVault MD1400 please.
Top
DELL-Shine K
6 Operator
•
3K Posts
1
August 24th, 2021 02:00
H830 controller is supported on T330. You can refer below link for slots where H830 to be installed on T330.
https://www.dell.com/support/manuals/en-us/poweredge-t330/t330ompub/expansion-card-installation-guidelines?guid=guid-d8d04fd5-630f-47d3-a790-19c0933dd637&lang=en-us
Oruth
13 Posts
0
August 24th, 2021 02:00
Thank You for reply.
But i have to be sure,
If i have already installed PERC H330 for internal enclosure i can still install the H830 for external enclosure.
Am I right?
DELL-Shine K
6 Operator
•
3K Posts
1
August 24th, 2021 02:00
Yes. We can have both H330 and H830 on the server. H330 will be connected to the internal backplane and H830 will be connected to external enclosure.
Oruth
13 Posts
0
August 24th, 2021 03:00
Thank You,
One last question: the PERC H830 will work fine with MD1400?
Oruth
13 Posts
0
August 24th, 2021 03:00
Thank You so much for help.
DELL-Shine K
6 Operator
•
3K Posts
0
August 24th, 2021 03:00
Yes. MD1400 is supported by H830. You can refer below link for details
https://www.dell.com/support/manuals/en-us/storage-md1400/md14xx_sm_pub/supported-adapters-and-controllers?guid=guid-f8845a54-a1d5-4753-b6d3-0d6bddfd8e95&lang=en-us