Unsolved
This post is more than 5 years old
10 Posts
0
9178
September 27th, 2004 13:00
Ghosting a RAID 5 volume
I'm trying to ghost a RAID 1 volume. I need to find the SCSI driver for my PERC 3/DI controller. Has anyone gotten this to work? I contacted tech support and they told me they didn't have a DOS driver for it.
No Events found!
tnetjpm
37 Posts
0
September 29th, 2004 07:00
Have you actually tried this yet because GHOST should see the PERC 3/Di fine under DOS without a driver. I have used GHOST on PE2550/2650/4400/4600's with 3/Di's fine with no driver requirement.
If you have tried it and it fails, what PERC firmware and GHOST version are you running ?
What error message, if any, does GHOST display ?
tnetjpm
37 Posts
0
September 29th, 2004 11:00
tnetjpm
37 Posts
0
September 29th, 2004 11:00
Mmmmm. Symantec don't support that as such. But it may well work.
See http://service1.symantec.com/SUPPORT/ghost.nsf/8477deaaaafc102288256b1e00704619/0e3f4af67f475437852569d2005a1608?OpenDocument&prod=Symantec%20Ghost&ver=7.5&src=ent&pcode=symghost&dtype=corp&svy=&prev=&miniver=symghost_75
gates1150
10 Posts
0
September 29th, 2004 11:00
gates1150
10 Posts
0
September 29th, 2004 11:00
gates1150
10 Posts
0
September 29th, 2004 11:00
gates1150
10 Posts
0
September 29th, 2004 11:00
tnetjpm
37 Posts
0
September 29th, 2004 11:00