Unsolved
This post is more than 5 years old
4 Posts
0
6817
December 22nd, 2009 03:00
Monitor SATA disk with OMSA
I have an PE R300 with 2 SATA disk (without any controller installed).
With OMSA 6.2 installed (Windows 2003 standard) I can't monitor any disks.
"omreport storag" returns "STORAGE OK - 0 phisical disk, 0 virtual disk".
There is a way to monitor SATA disk with OMSA?
Thanks
Lorenzo
No Events found!
theflash1932
11 Legend
•
16.3K Posts
0
January 1st, 2010 19:00
OMSA interfaces with the controller, which then reports what it knows. No controller, no report.
5ElementsFist
5 Posts
0
January 2nd, 2010 18:00
OMSA pulls its reports directly from the BMC. Make sure that the BMC Firmware is up to date. Even with the embedded SATA controller, you should still be able to monitor your drives in OMSA. You may also need to update the firmware on your drives. You can check your firmware versions in OMSA and update them manually or you can boot to the SBUU and apply all the firmware updates from the SUU.
lgts
4 Posts
0
January 5th, 2010 08:00
I check with SUU disc and all drivers, firmware and software are updated.
Result is unchanged.
Regards,
Lorenzo.