Unsolved
This post is more than 5 years old
2 Posts
0
12458
June 21st, 2008 13:00
PE 1900 and PERC 5/i problem...
All,
Here is an interesting one. My PE 1900 has run pretty much flawlessly for over a year. Yesterday, my system crashed. Upon reboot, the PERC 5/i reported a Logical Disk failure. I went into the configuration utility after reimporting the "Foreign" Configuration, only one of my three hard drives is initialized. The PERC 5/i BIOS can see all four hard drives, but cannot put them into the VD. I would really like some input on this, since I really need this server to be working. Thanks for all the help.
--Pete
No Events found!
esbon
3 Posts
0
November 15th, 2008 04:00
Hi, I guess by now, you've solved your problem. The reason I ask is because I have the same configuration: RAID 1 and RAID 5. Does this mean that when one drive fails in either VD, the whole thing will fail?
Some feedback about your experience will be greatly appreciated.
Thanks