Unsolved
This post is more than 5 years old
2 Posts
0
31261
July 22nd, 2012 21:00
PE 2950 fatal error
i have on the display the following error E171F PCIE Fatal error B0 D2 F0.
Rebooting the server the following appear:
DEGRADED LINK WITH ERROR: EMBEDDED I/O BRIDGE DEVICE 1
EXPECTED LINK WIDTH IS X4
ACTUAL LINK WIDTH IS X1
SYSTEM HALTED
before the above error using the ctrll R during boot, the status of Raid is shown as good, but i am not sure if the Raid controller is related to the error.
No Events found!
DELL-Chris H
7 Practitioner
•
9.7K Posts
•
48K Points
0
July 23rd, 2012 07:00
Parrinle,
What is the OS installed on the server?
Also, do you have Open manage installed on the server?
The error you are getting is indicating that the BIOS has reported a PCIe fatal error on a component that resides in PCI configuration space at bus 00, device 02, function 00.
Let me know.
Dev Mgr
6 Operator
•
9.3K Posts
•
3 Points
0
July 23rd, 2012 10:00
That specific error message looks like it's something that comes up during the POST process, not the boot process.
If this is indeed during the POST, the OS or OMSA are irrelevant.
parrinle
2 Posts
0
July 24th, 2012 09:00
Yes i believe error appear during the POST, - just some seconds before OS start to be loaded.
On 10 jun 2010 1:23 PM your answer to an identical post: was
----------
That error is most likely related to the PERC5i or PERC6i that's in the server. These use a x4 SAS channel (4 x 300MByte/s) for bandwidth and failover/redundancy. It sounds like something is wrong with the PERC, the cable, or the backplane
----------
quantranblog
9 Posts
0
July 25th, 2012 02:00
Can try by take out all PCI card, clear VNRAM and mimimum POST, if can't minimum POST then problem maybe from Mainboard.