PERC 2/QC - Source for Cache Memory?

Question

Does anyone know of a source for obtaining the 128 MB 50ns unregistered EDO SDRAM memory required for the Adaptec PERC2/QC RAID controller card? I've got a couple of these cards with smaller cache modules that I would like to upgrade, but it seems Crucial and most of the other memory suppliers have dropped this particular memory module from their line.

Jon_dechiro · Answer

You could try contacting Dell Spare Parts at 1-800-372-3355. The part number for the PERC2 128MB DIMM is 1479D.

bigtom118 · Answer

How about the part # for the 64mb cache dimm or Perc2/qc?

DELL-GaryS · Answer

Hi,

To assist people with obtaining the tested and qualified memories for their PERC 2 RAID controller. Dell no longer has any of these to sell, retaining our final stocks for warranty service obligations.

128 M/B cache for PERC 2/QC P/N 1479D

SAMSUNG    KMM374F1600BK-5
MICRON     MT18LD1672AG-5X
HYUNDAI    HYM5V72A1604ATKG-50
SAMSUNG    KMM374F1600CK3-5
SAMSUNG    M374F1600CJ3-C50
VIKING     VE16721U4EN3-DL01

64 M/B cache for PERC 2/QC P/N 9961E

SAMSUNG    KMM374F803BK-5
SAMSUNG    KMM374F803CK3-5
VIKING     VE8721U4EN3-DL01
HYUNDAI    HYM5V72A804ATFG-50
SAMSUNG    M374F0803CJ3-C50

32 M/B cache for PERC 2/QC P/N 0479D

SAMSUNG    KMM374F404BS-5
MICRON     MT18LD472FAG-5X
MICRON     MT5LDT472AG-5X
SAMSUNG    KMM374F404CS1-5
SAMSUNG    M374F0405CT1-C50

Dreamthinker · Answer

sorry to dig up an old thread but its was the closest one i could find for my question,   I have a few 128meg sticks of 168pin 50ns ECC micron nimber MT18LD1672G-5X   it is the same number as the 128 sticks for the PERC cache, but without the A twords the end,   Will it work in the Perc2/QC

warwizard55 · Answer

http://www.micron.com/products/modules/edofpm/part.aspx?part=MT18LD1672AG-5%20X   http://www.micron.com/products/modules/edofpm/part.aspx?part=MT18LD1672G-5%20X   Compare the data sheets Hmm, they both revert to the same data sheet http://download.micron.com/pdf/datasheets/modules/DM77_2.pdf   The A in the part used by Dell is not addressed, I would give this part an excelllent chance of working in the Dell PERC 2 controller.   warwizard, formerly Dell-GaryS

warwizard55 · Answer

Thanks for clearing that up

bigtom118 · Answer

MT18LD1672G-5X is Buffered memory, used in older servers, such as PE6300/6350. This will not work in an Perc2/qc.   MT18LD1672AG-5X is Unbuffered Memory, used in workstations & PC's.   MT18LD1672AG-5X (or equivalent) is required for Perc2/qc cache.  [Unbuffered 50ns EDO memory]. Note that 60ns will not work either.

Dreamthinker · Answer

thanks for the prompt, informative, detailed, and easy to understand response =)

PowerEdge HDD/SCSI/RAID

PERC 2/QC - Source for Cache Memory?

Was this post helpful?