Unsolved
This post is more than 5 years old
1 Message
0
24108
June 2nd, 2009 07:00
Poweredge R710 Raid 5 Controller
I have recently purchased a Dell Poweredge R710 server:
| Dell Poweredge R710 E5502,1.86GHz 4MB Cache, no Add Proc, 2GB (2x1GB) DDR3 Udimms, 16xDVDR, Riser with 2 PCIe, SAS 6iR Int Raid Controller, R710 Rack Bezel, C1 no Raid for SAS 6/iR Controller, High Output Power Supply 870W, 4 x 750GB Near SATA Line SAS 3.5" 7.2K, 2 x 160GB SATA 3.5" 7.2K Dual Embedded Broadcom NetXtreme II 5709 GB Eth NIC iDRAC
|
The raid controller card fitted is the SAS 6/IR which only supports Raid 0 and 1.
What I need is a Raid 5 controller. Which card from Dell (need to purchase the card from Dell) do I need to purchase to provide the Raid 5 function for me?
Thanks in advance - Neil
No Events found!
Dev Mgr
6 Operator
•
9.3K Posts
•
3 Points
0
June 2nd, 2009 07:00
If I go to www.dell.com and go through the site to build an R710, under the raid controller options it shows the PERC6i as an option.