Unsolved
This post is more than 5 years old
3 Posts
0
2217
August 30th, 2010 04:00
R200 and server 2003
Need to install WinServer2003 over SBS2008 on a new R200, with a SAS6iR RAID controller and a 250GB Hdd. It advises me I can't when I boot from the SRVR2003 CD, any ideas please (and THANK YOU in ADVANCE!)
No Events found!
theflash1932
11 Legend
•
16.3K Posts
0
August 30th, 2010 08:00
See your other post.
"Server 2003 will need the driver for the SAS 6/iR RAID controller. If you have two drives in here, they will need to be configured in a RAID 1 before installing.
SAS 6/iR:
http://support.dell.com/support/downloads/download.aspx?c=us&cs=04&l=en&s=bsd&releaseid=R194052&SystemID=PWE_R200&servicetag=&os=WNET&osl=en&deviceid=13119&devlib=0&typecnt=0&vercnt=2&catid=-1&impid=-1&formatcnt=0&libid=46&typeid=-1&dateid=-1&formatid=-1&source=-1&fileid=267804
Since 2003 can only load a driver via floppy at the F6 prompt, you will need a floppy drive (USB ok) and a floppy disk with the above drivers on it. If you don't have a floppy disk/drive, then you will need to use nLiteOS.com to integrate the drivers (text-mode) into the installation media."