Unsolved
1 Rookie
•
26 Posts
0
1117
December 11th, 2020 09:00
Removable Media Storage
Hi All,
Looks like it's not that easy to find relevant materials for R630 PCI extender as I thought initially. So maybe I can ask it differently.
What card / HBA do I need to add to T630 to connect WYNC0 ?
Part #:WYNC0
Part Desc.:ASSY,RMS,4X2.5 SSD,T630
4X2.5 Inch SSD, Removable Media Storage, Assembly
No Events found!
Dell-DylanJ
6 Operator
•
2.9K Posts
0
December 11th, 2020 14:00
Hello,
The cable you're looking for should be K9TVP. Looks like that's for a 4+6 configuration of 10 drives. The alternate backplane options are for a 24 drive configuration of 1.8" drives, or an 8 drive configuration with no cable match. If you can confirm that backplane, then the cable should be correct. If that's not what you have, you're welcome to send me your service tag in a PM, so that I can get you a better answer.
Let me know if that helps out!
_Sed_
1 Rookie
•
26 Posts
0
December 11th, 2020 20:00
Thanks for part number for cables, but I'm asking about HBA or PCIe extender card that I should plug to my server to connect backplane of WYNC0 .
WYNC0 is a kit, it has cage with 4x 2.5 PCIe(U2) slots + backplane, backplane part number is 2NJDR
DELL-Young E
Moderator
•
5.4K Posts
•
37 Points
0
December 13th, 2020 20:00
Hi, from my best knowledge I believe Dell does not have HBA for T630 for your WYNCO. Sorry I couldn't be of help.
_Sed_
1 Rookie
•
26 Posts
0
December 14th, 2020 12:00
I'm sorry I don't understand your answer.
This media bay is intended to be used in T630 correct ? how is it connected to the system ?
Dell-DylanJ
6 Operator
•
2.9K Posts
0
December 14th, 2020 12:00
I believe you are referring to the PCI expander. There is not another controller to purchase to use it. It needs to be cabled. Please refer to the manual linked below. You can search for the term "cabling" to see how the expander is connected. All the diagrams show the expander as being cabled to the board.
https://dell.to/2Wdy935
_Sed_
1 Rookie
•
26 Posts
0
December 17th, 2020 10:00
Correct, this is what I've been asking from the start.
What is a part number for PCIe expander for T630
Dell-DylanJ
6 Operator
•
2.9K Posts
0
December 17th, 2020 12:00
Apologies, at this point in time, I don't understand what you're looking for. If you can clarify, I would appreciate it. In your first message you asked about an HBA or card to connect the expander to. There is none and the card would be cabled to the system board.
The part you refer to as WYNC0 is 2NJDR.
Can you install this in your server? I do not know and will not know without the tag being provided.
This expander could be connected to backplane 8 port 70YDP and 16 port 9X8T9, per the cabling diagrams.
I'd highly recommend sending the service tag over, so that we can see the hardware configuration is and identify something that may work. There are numerous different configurations, and not all parts will work. If you simply want a part numbers that you can connect to, then this information should suffice.