Skip to main content
Start a Conversation

Unsolved

This post is more than 5 years old

Anthraxitus

2 Posts

2460

October 13th, 2005 05:00

Storage bus

Hi.
 
Stupid question but hey I need to ask... Have a Dell PowerEdge 2850 with 4 harddrives. I need to get 1 of these drives on a different storage bus. Any help?

Anthraxitus

2 Posts

October 13th, 2005 11:00

I already have them on different channels ( got a daughter card)  but for clsutering i need them on different bus than boot disk.

Dev Mgr

6 Operator

 • 

9.3K Posts

 • 

3 Points

October 13th, 2005 11:00

What do you mean by a different 'storage bus'?

Do you mean on another scsi channel?

Dev Mgr

6 Operator

 • 

9.3K Posts

 • 

3 Points

October 13th, 2005 17:00

To create a cluster you will have to buy an external (external to the server) storage solution. One example would be a PV220S, or you could go SAN (e.g. AX100 (low end/low performance) or CX-series (close to scsi performance, but a CX series can support SANcopy, mirrorview (mirror the data to a 2nd array that can be at another location), non-distruptive upgrades, multiple servers (depending on model it's between 15 and 128 servers (when using redundant paths)).

Was this post helpful?

View All

No Events found!

Top