This post is more than 5 years old
3 Posts
0
12157
November 20th, 2018 15:00
T110 II Perc S100 Driver
For the life of me I need the .inf file and not the .exe's that are available on the Dell site for the Perc S100 raid controller. It is for a 2008 R2 x64 server. Please help, I have been banging my head against my desk for several hours now trying to get this server back online.
It's not that I need to repair windows or run the exe in the repair module. I need to boot into EaseUS Partition Manager and extend the C volume and decrease the D volume because its so full that boot up fails before the login screen.
No Events found!
ArduinoGuy
20 Posts
2
November 21st, 2018 12:00
Hey Sean,
What I do is rename the .exe to .zip. If you open the folder, you find a payload directory. Everything you want is in there.
Daniel My
12 Elder
•
6.2K Posts
0
November 20th, 2018 17:00
Hello
If you select 2008R2 as the operating system on the T110 II and go to SAS RAID, in the bottom section you should be able to locate the S300/S100 driver. There is a driver on the download page listed as hard disk. That should be a self-extracting executable with an information file that you can use to load the driver.
http://www.dell.com/support/
Thanks
Sean Pilgrim
3 Posts
0
November 21st, 2018 12:00
You are a genius. Thank you!
ArduinoGuy
20 Posts
0
November 21st, 2018 15:00
Glad it helps man!
Dani_Dell
1 Message
0
March 31st, 2019 00:00
Life saver. Thank you!