5 Posts
0
342
October 27th, 2022 20:00
Upgrade to H700
Hi guys,
I am upgrading my T610 from PERC 6i to H700, my server has 8 x 2.5 SAS / SATA cage, the cables that come from this cage are 2 x 4 SATA/SAS connectors/cables that become 1 connector/cable that goes into every port of the PERC, these connectors are too big to fit into H700, which set of cables do I need in order to perform the upgrade?
any help will be appreciated
Thank you
No Events found!
Dell-Martin S
Moderator
•
3.8K Posts
•
25.5K Points
1
October 28th, 2022 06:00
Hi,
this could be the needed cables
R144M: H700 PERC and H200 PERC SAS Cable Assembly (Controller 0 to Backplane A)
N168M: H700 PERC and H200 PERC SAS Cable Assembly (Controller 1 to Backplane B)
Did you have any further questions?
Regards Martin
DELL-Charles R
Moderator
•
4.7K Posts
•
25.5K Points
1
October 28th, 2022 07:00
Hello MatrixOne,
Take a look at Page 144 : https://dell.to/3fjUTeD
#4 and #6 are the controller cables connecting to backplane
MatrixOne
5 Posts
0
October 28th, 2022 07:00
How am I going to connect those cables if they end in 1 connector, and I have 8 connectors with 8 hard drives at the present time?
MatrixOne
5 Posts
0
October 28th, 2022 10:00
Thank you for priceless assistance