Unsolved
2 Posts
0
173
October 4th, 2020 14:00
perc6 h710 cross flashed
i have a poweredge r720 with 64gb ram and an h710 cross flashed with 4 x 4tb sas drives and 4 x 2tb sata drives installed
i can install vmware and a guest os like windows, freens etc and can create shares that i can see from my desktop and laptop no isuues there.
now if i copy files to the share all goes well till i ttry and copy files over 2gb and thios is no ntfs and zfs systems it reports i dont have permissions to do it.
any ideas?
DiegoLopez
4 Operator
•
2.7K Posts
0
October 5th, 2020 07:00
Hello @thecaver99,
I see no specific reason on the hardware level for this to happen. Did you check firmware level to discard a hardware problem? Maybe did you check the lifecycle log to see if there are any errors?
Regarding the permissions error. I would suggest checking the OS logs to see if there are any error messages. There is not many information about the OS version you are having the problem with.
Please, let me know if you any other question.
Regards,
thecaver99
2 Posts
0
October 7th, 2020 04:00
i went and installed win 10 on the system directly and when i shared a drive i was able to copy of really large files to the shares no problems so i defnitly thinks its an os issue for sure
DiegoLopez
4 Operator
•
2.7K Posts
0
October 7th, 2020 05:00
Yes, it is. So did you install win10 directly on the R720? or in a Virtual machine?
Regards.